2020. 3. 16. 13:03ㆍ카테고리 없음
You need to put the scanner into “manual” mode and go to each locked out channel. Press the “L/out” button on each of these channels to unlock them.Nornmally this is done to bypass certain channels when scanning so that you can concentrate on others.Go to page 29 and 30 of the manualTo clear all locked out frequencies in a search bank:1: press SEARCH2: Select the search bank that you want to clear all locked out frequencies3: Fress FUNC and then L/OUT (Lock List Appears)4:Press FUNC then 6. To clear entire list press 1Happy days, lonely hearts! I'm having a problem myself with my GRE PSR-295.
Gre Psr 295 Software Update Version
I think it may need to be re-set (I don't know how you revert everything to factory/default settings and clear the memory) as most of the channels scanned, some of them I can barely hear. I can only assume that the receiving frequency that I try to lock onto is off-set by the transmitting frequency of ham stations that would need some alignment on the receiving end. I also am unsure if it could be an aerial problem and what might be done to replace it. Its a shame about this problem, as I do monitor as an SWL for special purposes (e.g. For filming motor races working on a PMR446 net, special event recording, etc.) The only channel I've been able to fully-lock onto is the MSA (Motor Sports Association's) dedicated channel at race tracks. For some reason that frequency just about works, but at the same time, most of the comms are within a mile line-of-sight.
The rest of the time, I can only just hear other frequencies, even coming from my PMR446 walkie-talkies, once again because it seems to not match exactly the transmitting frequency it says on the dial (even taking it in steps doesn't seem to work - would be nice to have a fine-tune mechanism to get the exact lock-on whatever I'm monitoring at the time.